LUCID Support & Help https://validator.w3.org/feed/docs/rss2.html General Safety Notices General Safety Notices Pixel Formats – 3D Getting Started App Note: Using Helios2+ with the Point Cloud Library for Dimensioning Pixel Formats – Area Scan Using QOI with LUCID Cameras Prerequisites HDR Mode Temperature Guidelines for Atlas10 SWIR cameras LUCID Support. How May We Help? Using GigE Vision RDMA Streaming Protocol in GigE Vision 3.0 Force and Persist IP Addresses Using Mellanox Card PTP Startup Checklist Diagnostic Commands Common Issues & Solutions Troubleshooting Running the applicatino – blank for now Camera IP Address Assignment RoCE v2 Mode Configuration NVIDIA-peermem Configuration Start Sequence Loading nvidia-peermem module NIC Ring Buffer Configuration Network Switch Configuration IOMMU CUDA and cuDNN Installation Mellanox OFED Installation Kernel Buffer Tuning Network Interface Card Configuration Host System Configuration Required Software Downloads Operating System Software Requirements & Installation Camera IP Assignments VLAN Configuration Camera Specifications System Components Hardware Specifications Topology Overview Overview Network Topology Setup FFC Connector Opening Raw Images in ArenaView MP App Note: Using the Helios2 Chroma Using Auto Exposure and Auto Gain on LUCID Cameras Pixel Formats – Line Scan Setting up a Network Bridge