Node Name | Description |
---|---|
CounterSelector | Selects which Counter to configure. |
CounterEventSource | Select the events that will be the source to increment the Counter. |
CounterEventActivation | Selects the Activation mode Event Source signal. |
CounterTriggerSource | Selects the source to start the Counter. |
CounterTriggerActivation | Selects the Activation mode of the trigger to start the Counter. |
CounterResetSource | Select the signals that will be the source to reset the Counter. |
CounterResetActivation | Selects the Activation mode of the Counter Reset Source signal. |
CounterReset | Does a software reset of the selected Counter and starts it. |
CounterValue | Reads or writes the current value of the selected Counter. |
CounterValueAtReset | Reads value of the selected Counter when it was reset by a trigger or by an explicit CounterReset command. |
CounterDuration | Sets the duration (or number of events) before the Counter End event is generated. |
CounterStatus | Returns the current status of the Counter. |
TimerSelector | Selects which Timer to configure. |
TimerTriggerSource | Selects the source to start the Timer. |
TimerTriggerActivation | Selects the Activation mode of the trigger to start the Timer. |
TimerDuration | Sets the duration (in microseconds) of the Timer pulse. |
TimerDelay | Sets the duration (in microseconds) of the delay to apply at the reception of a trigger before stating the Timer. |
TimerReset | Does a software reset of the selected Timer and starts it. |
TimerValue | Reads or writes the current value of the selected Timer. |
TimerStatus | Returns the current status of the Timer. |